Enquiry number: +8615864583687 +8618663615891
+8615864583687 +8618663615891
Category：Spin Flash Dryer
The XSG rotary flash dryer consists of key components such as a drying host, feeder, heat source device (hot blast stove or steam pipeline), air filter, blower, cyclone separator, bag filter, induced draft fan, etc. The drying machine is equipped with a rotating cutting device to cut and crush filter cake shaped pseudo agglomerated materials and large particle materials. With the operation of the rotary cutting device, the dried material is rotated into a rotary powder, which accelerates the evaporation of moisture from wet materials and improves the drying effect.
Flash drying machine has the advantages of high thermal efficiency, short drying time, and good energy-saving effect. The paste like materials can be directly dried to produce powdered dried products, saving the processes of pre-treatment before drying, crushing and screening after drying. Due to the fast drying speed and short heating time of the material, it is not easy to damage the components of the dried material, which is particularly beneficial for drying heat sensitive materials. The drying process is fully enclosed, with no impurities mixed in, resulting in high-quality finished products and a good operating environment. At present, various models of flash dryers have been designed according to different materials, and a series of products have been formed, which are increasingly widely used in industries such as chemical, pharmaceutical, light industry, food, and mining.
The rotary flash dryer adopts a high-speed hot air flow entering the cylinder in the tangential direction. Due to the spiral motion of the airflow inside the cylinder, on the one hand, the temperature of the medium around the particles is reduced, and on the other hand, the flow rate and temperature of the medium are increased, which greatly improves the speed of external diffusion. On the other hand, high-temperature airflow impacts particles or small wet materials located at the lower part of the cylinder at high speed. At the same time, the stirring effect of the stirring blades inside the cylinder breaks down the particles, reduces their particle size, and reduces the length of the internal capillary tube, thereby enhancing the effect of internal diffusion and reducing its resistance. Most of these particles are repeatedly broken during the high-temperature and high-intensity mixing cycle at the bottom of the cylinder. Eliminating material clumping is also a powerful measure to promote internal diffusion and enhance the evaporation of particle moisture.
Linqu Weiyang Machinery & Equipment Factory
Contact: Mr Zhang Tel/Fax: +86 536-3119287
Mobile phone: +8615864583687 +8618663615891
QQ: 401138495
Email: cnwmhg@126.com
Accounting bank: Agricultural Bank of China Limited Linqu County Sub-branch
Bank account number: 15442001040020491
Address: West Industrial Park, Linqu County, Shandong Province
魯公網安備 37072402370843號
