Enquiry number: +8615864583687 +8618663615891
+8615864583687 +8618663615891
Category：Paper product mesh belt dryer
Coal, electricity, and steam can be used as heat sources, with fully automatic control of drying temperature and speed. The materials are placed in the dryer, and a circulating fan evenly blows hot air to the dried materials. The dryer is equipped with a dehumidification system to promptly remove moisture and achieve the purpose of drying.
Belt dryer belongs to the jet airflow belt drying type, where hot air is sprayed from top to bottom onto the material on the conveyor belt in a jet stream. Due to the jet velocity of over 15m/s, the convective heat transfer film is thin, the heat transfer coefficient is high, and the drying speed is fast. When the DWF series belt dryer is used for non breathable materials, the airflow sprayed on the top still returns to the top, and the airflow sprayed on the bottom still returns to the bottom, participating in the cycle. The airflow beam of breathable materials has strong penetration and diffusion inside the material. The use of heat sources can include steam, electric heating, hot air stoves, and fuel flue gas. The DWF jet air flow belt dryer is mainly used for fiberboard, gypsum board, cardboard board, pulp film, coating drying, etc. It is also suitable for drying sheet materials and some special materials.
Main technical parameters:
model | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 | |
Number of units | four | five | four | five | four | five | |
Bandwidth (m) | one point two | one point six | two | ||||
Drying section length (m) | eight | ten | eight | ten | eight | ten | |
Laying thickness (mm) | 10-80 | ||||||
Operating temperature (℃) | 50-120 | ||||||
Steam pressure (Mpa) | 0.2-0.8 | ||||||
Steam consumption (kg/h) | 120-130 | 150-375 | 150-375 | 170-470 | 180-500 | 225-600 | |
Heat exchange area (m ^ 2) | two hundred and seventy-two | three hundred and forty | three hundred and fifty-two | four hundred and forty | four hundred and forty-eight | five hundred and sixty | |
Drying time (h) | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | |
Dry strength (kg)/h | 60-160 | 80-220 | 75-220 | 95-250 | 100-260 | 120-300 | |
Number of fans | five | six | five | six | five | six | |
Total power of fan (kw) | six point six | eight point eight | nine | twelve | twelve | sixteen | |
Total power of equipment (kw) | eleven point four | thirteen point six | eleven point four | thirteen point six | nineteen point seven | twenty-three point seven | |
External dimensions | Length (m) | nine point seven seven | eleven point seven seven | nine point seven seven | eleven point seven seven | nine point seven seven | eleven point seven seven |
Width (m) | one point five | one point five | two point two four | two point two four | two point six six | two point six six | |
Height (m) | two point eight three | two point eight three | two point eight three | two point eight three | three point five zero | three point five zero | |
Total weight (kg) | four thousand and eight hundred | five thousand seven hundred and eighty | five thousand and four hundred | six thousand five hundred and fifty | six thousand three hundred and fifty | seven thousand and eight hundred | |
Linqu Weiyang Machinery & Equipment Factory
Contact: Mr Zhang Tel/Fax: +86 536-3119287
Mobile phone: +8615864583687 +8618663615891
QQ: 401138495
Email: cnwmhg@126.com
Accounting bank: Agricultural Bank of China Limited Linqu County Sub-branch
Bank account number: 15442001040020491
Address: West Industrial Park, Linqu County, Shandong Province
魯公網安備 37072402370843號
